Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8784480
5.
Do not attempt to lubricate a regulator. Always change a cylinder
carefully to prevent leaks and damage to the cylinder's walls, valve
or safety devices.
6.
Gases in the cylinder are under pressure. Protect the cylinder from
bumps, falls, falling objects and harsh weather. A punctured
cylinder under pressure can become a lethal projectile. If a cylinder
is punctured, do not approach until all pressure is released.
6.1 Protect the valve and regulator. Damage to either can result in
regulator's explosive ejection from the cylinder.
7.
Always secure a gas cylinder in a vertical position to a welding cart or
other fixed support with a steel chain, so it cannot be knocked over.
7.1 Away from areas where they may be struck or subjected to
physical damage.
7.2 A safe distance from the cutting operations and any other
source of heat, sparks or flame.
7.3 Do not use as an improvised support or roller.
8.
Always place the cylinder cap securely on the cylinder unless it is
in use or being serviced.
9.
Do not use a wrench or hammer to open a cylinder valve that cannot be
opened by hand. Notify your supplier for instructions.
10. Do not modify or exchange gas cylinder fittings.
11. Close the cylinder valve and immediately remove the faulty regulator
from service for repair, if any of the following conditions exist:
11.1
Gas leaks externally.
11.2
Delivery pressure continues to rise with the downstream
valve closed.
11.3
The gauge pointer does not move off the stop pin when
pressurized or fails to return to the stop pin after pressure is
released.
12. Do not attempt to make regulator repairs. Send faulty regulators to
the manufacturer's designated repair center.
13. Do not weld on the gas cylinder.
14. Keep your head and face away from the cylinder valve outlet when
opening the cylinder valve.
12
80A PROCUT 80 Plasma Cutter
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
