Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
12. Make certain the power source conforms to requirements of your
equipment (see Specifications).
POWER TOOL PRECAUTIONS
This equipment requires a dedicated 230 volt, 50 amp single-phase
alternating current circuit equipped with a similarly rated circuit breaker when
using single-phase power. Equip with a 30A circuit breaker if using three-
phase 30A alternating current. Do not run other appliances, lights, tools or
equipment on the circuit while operating this plasma cutting machine.
1.
Do not drape or carry coiled welding cables on your body when
the cables are plugged into the plasma cutting machine.
2.
Do not start the tool when the electrode is touching the workpiece.
3.
Hold the tool by the insulated gripping surfaces when performing
an operation where it may contact hidden wiring or its own cord
and cables. Contact with a 'live' wire will electrify exposed metal
parts and shock the operator.
4.
Take work breaks to prevent the tool's motor from overheating
and/or overloading. Refer to the plasma cutting machine's duty
cycle in Specifications.
5.
Keep hands away from the electrode and the area it is being
applied to when the tool is in operation.
6.
Do not connect the plasma cutting machine ground clamp to an
electrical conduit. Do not weld on an electrical conduit.
7.
Do not touch the electrode or welded surface immediately after
use. The surface will be hot and may cause an injury.
8.
Never use a tool with a cracked or worn electrode. Change the
electrode before using and discard the damaged one.
ELECTROMAGNETIC FIELDS
WARNING! Stop welding immediately and move away from the
plasma cutting machine if you feel faint, dizzy, nausea or shocks.
Seek medical attention.
Electromagnetic Fields (EMF) can interfere with electronic devices such
as pacemakers. Anyone with a pacemaker should consult with their
doctor before working with or near an arc welding unit. The following
steps can minimize the effects of electromagnetic fields.
Visit www.princessauto.com for more information
80A PROCUT 80 Plasma Cutter
8784480
15
Publicité
Table des Matières
