Hazard Definitions - PRO-POINT PROCUT 80 Manuel

8784480
SPECIFICATIONS
Skill Level
Input Voltage
Duty Cycle
Metal Type
Output Current
Max. Amperage Draw
Rated Cut Capacity
Sever Capacity
Generator Compatible
Air Consumption
Dimensions
*Single-Phase ** Three-Phase

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that
will result in severe personal injury or death if the proper
precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice
that could result in severe personal injury or death if the
proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that
may result in minor or moderate injury if proper practices are
not taken.
NOTICE! This notice indicates that a specific hazard or unsafe
practice will result in equipment or property damage, but
not personal injury.
2
80A PROCUT 80 Plasma Cutter
Low
230V SP*/3PH**, 460V SP/3PH
40% @ 60A SP/ 40% @ 80 A 3PH
Any conductive metal
20 to 80A
44A SP / 24A 3PH
1 in.
1-1/2 in.
Yes
6.67 CFM at 75 PSI
22 x 8-11/16 x 17-3/4 in.
For technical questions call 1-800-665-8685
V1.0