36
7.2.1 WIRING REQUIREMENTS
It is necessary to hard wire this appliance.
EN
Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence
of local codes, use the current CSA C22.1 Canadian electrical code in Canada or the ANSI/NFPA national
electrical code in the United States.
NOTE: This appliance is equipped with a three-prong (grounding) plug for protection against shock
hazard and should be connected into a properly grounded circuit. Do not cut or remove the grounding
prong from the plug.
W415-1519 / H / 03.22.17
!
DO NOT WIRE 110 VOLTS TO THE VALVE OR WALL SWITCH.
WARNING
NIGHT
BLOWER
LIGHT