Freestyle LibreLink Manuel D'utilisation page 33

2. Discard the used Sensor according to local regulations. See
Disposal. When you are ready to apply a new Sensor, follow the instructions in
Applying Your Sensor
before 14 days of use, you will be prompted to confirm that you would like to
start a new Sensor when you first scan it.
Replacing Your Sensor
Your Sensor automatically stops working after 14 days of wear and must be
replaced. You should also replace your Sensor if you notice any irritation or
discomfort at the application site or if the App reports a problem with the Sensor
currently in use. Taking action early can keep small problems from turning into
larger ones.
CAUTION: If the glucose readings from the Sensor do NOT seem to match with
how you feel, check to make sure that your Sensor has not come loose. If the
Sensor tip has come out of your skin, or your Sensor is coming loose, remove the
Sensor and apply a new one.
Setting Reminders
You can create single or repeating reminders to help you remember things like
checking your glucose or taking insulin. There is one default reminder to help you
remember to scan your Sensor. This Scan Sensor reminder can be changed or
disabled but cannot be deleted.
Note: If you want to receive a sound/vibration with your reminder, ensure that
sound/vibration on your smartphone is turned on, sound is set at a level you can
and Starting Your Sensor. If you removed your last Sensor
ART41361-001_rev-A 2:18 pm 30 aug 2019
Maintenance and