Freestyle LibreLink Manuel D'utilisation page 12

7. Select how you count carbohydrates (in grams or portions) and tap NEXT. The
carbohydrate unit will be used in any food notes you enter in the App.
8. Select whether you want sound and vibration OR vibration only when you scan
your Sensor. Tap NEXT.
Note: This option only displays if you are using Android 5.0 and higher. If you
are using a lower version, you will automatically get both sound and vibration
when you scan your Sensor.
9. The App now displays useful information about the My Glucose screen. Tap
NEXT to view information about the Glucose Trend Arrow. Tap NEXT again.
10. Apply a new Sensor and then tap NEXT. Go to
Note: If you need help applying your Sensor, tap HOW TO APPLY A SENSOR
or go to Applying Your
Applying Your Sensor
CAUTION:
• The Sensor Pack and Sensor Applicator are packaged together as a set and
have the same Sensor code. Check that the Sensor codes match before using
your Sensor Pack and Sensor Applicator. Sensor Packs and Sensor Applicators
with the same Sensor code should be used together or your Sensor glucose
readings may be incorrect.
• Intense exercise may cause your Sensor to loosen due to sweat or movement
of the Sensor. If your Sensor comes loose, you may get no readings or
unreliable readings, which may not match how you feel. Follow the
instructions to select an appropriate application site.
Sensor.
Starting Your Sensor.
ART41361-001_rev-A 2:18 pm 30 aug 2019