Specifications - Megger TDR1000/2 Guide De L'utilisateur

Specifications
Backlight: Stays on for 1 minute when activated.
Batteries: Six LR6 (AA) type batteries,
Manganese-alkali or
nickel-cadmium or
nickel-metal-hydride cells
Nominal voltage:
9V for Alkali or 7.2V for NiCad.
Battery consumption:
100mA nominal, 140mA with backlight.
(20/30 hours continuous use depending
on backlight use)
Safety: This instrument complies with IEC61010-1
for connection to live systems up to 300V
CAT III ***Phase to ground (415 V phase to
phase). Fused leads must be used if the
voltage between the terminals exceeds
150V.
EMC: Complies with Electromagnetic
Compatibility Specifications
(Light industrial) BS EN 61326-1, with a
minimum performance of 'B' for all
immunity tests.
16
Mechanical
The instrument is designed for use indoors or
outdoors and is rated to IP54.
Case Dimensions:
Instrument weight:
Case material:
Connectors:
Test Lead:
Display:
Environmental:
230 mm long (9 inches)
115 mm wide (4.5 inches)
48 mm deep (2 inches)
0.6kg (1.32lbs)
ABS
Two 4mm-safety terminals.
2 metres long consisting of
2 x 4mm shrouded connector
to miniature crocodile clips
128 64 pixel Graphics LCD.
Operational Temperature:
-15C to +50C (5F to 122F)
Storage Temperature:
-20C to 70C (-4F to158F)