Digital Audio Formats; Important Information; Safety Precautions - Philips HD 1500 Mode D'emploi

XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 12
12 ENGLISH

Digital audio formats

The device will recognize the following digital input signals:
– Stereo LPCM with sample frequencies 44.1 kHz and 48kHz
– Dolby® Digital (AC-3), up to 5.1 channels
– DTS®, up to 5.1 channels
In case an invalid digital signal is detected - for example a digital MP3 data
stream - the 'DIGITAL' indication LED will be illuminated in red.
In case a valid digital signal is detected - for example a digital DTS data
stream - the 'DIGITAL' indication LED will be illuminated in green.
TO ENSURE YOU GET THE BEST PERFORMANCE FROM YOUR
DIGITAL WIRELESS HEADPHONE SYSTEM:
PLEASE READ THIS MANUAL CAREFULLY.

Important information

• Please read the following instructions carefully, and retain this booklet for
future reference. All the safety and operating instructions should be read
before using the digital wireless headphone system.
• Check if the voltage indicated on the type plate (located at the bottom of
the set) corresponds to the local mains voltage before connecting to the
mains power supply.
• Remove the batteries from the headphone's battery compartment and
from the base station's charging compartment and disconnect the power
cable from the mains if the system is not in use for a long period.
• Prevent fire or shock hazard: do not expose this equipment to humidity,
rain, sand or excessive heat caused by heating equipment or direct
sunlight.
• Radio equipment for wireless audio applications is not protected against
disturbance from other radio services.

Safety precautions

• Do not use this product in damp places or close to water.
• Do not expose this product to extreme heat.
• Do not open this product.
In the event of technical difficulties take it to your Philips retailer.
• Do not cover this product.
• Inadequately protected or sensitive electronic equipment may be affected
by the use of this product.This interference may lead to damage to either
equipment. Please check whether or not surrounding equipment may be
affected by this product before you start using it.