Audio Connections - Philips SBCHC210/00 Mode D'emploi

XP SBC HC 210.1 SRS 07-04-2003 10:22 Pagina 7

Audio Connections

Connecting the IR transmitter to a
headphone output of an audio
source (figure 5)
1 Connect the 3.5 mm stereo plug of the
stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3mm
headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.
2 Switch on your audio source and carefully
increase the volume of the audio source.
– In case of certain TVs the headphone
output level can only be adjusted after
accessing the TV on-screen menu.
3 Switch on the headphone.
4 Adjust the volume to the desired level with
the headphone volume control.
Basic operation
When the IR transmitter is connected to a
headphone output of an audio source.
1 Switch on your IR transmitter and place it
at the same height or slightly lower than the
reception height of the IR headphone.
Environmental Information
All redundant packing material has been omitted.We have done our best to make the
packaging easily separable into two materials: cardboard and polyethylene
Your unit consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packing
materials, exhausted batteries and old equipment.
Audio Connections
2 Position the LED's towards the listening
area, ensuring that there are no obstacles in
between transmitter and headphone.
3 Switch on the headphone.
4 Switch on your audio source and carefully
increase the volume of the audio source.
– In case of certain TVs the headphone
output level can only be adjusted after
accessing the TV on-screen menu.
5 Adjust the volume of the IR headphone to
the desired level with the headphone
volume control.
IMPORTANT
Because IR light travels in a straight
line, place the IR transmitter at the
same height, or slightly lower than the
reception height of the IR headphone.
High IR light content such as sunlight
and bright incandescent indoor lighting
may degrade the audio signal and
cause interference. If you experience
such problems, simply move the system
to a darker area.
Follow the guidelines concerning the
maximum distance between
headphone and transmitter in order to
achieve optimal performance: please
refer to figure 6 on page 3.
7