Philips HD 1500 Mode D'emploi page 27

XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 27
OPTION 2: DIGITAL STEREO OR MULTI
CHANNEL SOURCE:
Connecting the digital wireless base station to a
digital stereo source (CD player with S/PDIF output,
etc.) or a digital multichannel source (DVD player
with S/PDIF output, etc.)
Base station
1 Connect one side of the S/PDIF digital audio cable (included) to the
S/PDIF output of the audio source and the other side to the S/PDIF input
of the base station.
2 Next take the S/PDIF cable that most likely came supplied with your
digital audio source. Connect one side of this 2nd S/PDIF digital audio
cable (not included) to the S/PDIF input of your amplifier or home
cinema receiver and the other side to the S/PDIF output of the base
station.
When connecting your audio equipment in this way, you will be able to benefit
from the Automatic Audio Signal Routing (AASR) feature. As long as the base
station is powered – even in stand-by mode – the audio signal from the audio
source will be made available not only to the digital wireless base station but it
will be routed through to the rest of your home entertainment set-up. Without
the need for swapping cables you can decide whether you wish to enjoy the
audio through your wireless headphones or through for example the speakers of
your home entertainment system.
3 Power on your audio source: switch on your audio source, i.e. DVD
player with S/PDIF output, CD player with S/PDIF output, etc.
ENGLISH 27