Philips HD 1500 Mode D'emploi page 28

XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 28
28 ENGLISH
IMPORTANT!
• In case of connecting an audio CD player to the HD1500 base
• When connecting a DVD player to the HD1500 base station: do
4 Power on the base station: switch on the digital wireless base station.
The power indication LED of the base station will change from red to
green.
5 Source select: select the digital input on the base station by pressing the
'Source' button.
The digital indicator will light up in GREEN. In case of an invalid digital signal
(for example a digital MP3 data stream) the digital indicator will be RED
blinking.
The device will recognize the following digital input signals:
– Stereo LPCM with sample frequencies 44.1 kHz and 48kHz
– Dolby® Digital (AC-3), up to 5.1 channels
– DTS®, up to 5.1 channels
6 Input signal detection: after the input signal has been analyzed, its nature
will automatically be indicated on the display of the base station.
– Stereo: will light up in case of a digital stereo signal
– Multichannel: will light up in case of a digital multichannel signal
– DTS: the DTS indicator will light up in GREEN.
– Dolby Digital: the Dolby Digital indicator will light up in GREEN
station making use of the CD player's digital outputs: do not up
sample the Audio CD digital output signal higher than 44.1 kHz.
not up sample the DVD digital output signal higher than 48 kHz.
(for example when playing a CD in a CD/DVD player,
or when playing a VCD in a DVD player)
(for example when playing a DVD in a DVD player.
The following multichannel streams can be decoded: