Philips HD 1500 Mode D'emploi page 17

XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 17
7 Night mode section
8 Dynamic Bass Boost section
9 Headphone output section
10 Transmitter section
Base station rear panel (figure 2)
11 POWER CONNECTOR
12 Analogue Input/Output connectors
a) button to activate Night mode
– Night mode will reduce the dynamics of the audio signal.This will
result in both the loudest and the most silent audio signals becoming
clearly audible, even at lower volume levels.
– The audio signals on a DVD movie disc have large dynamics, i.e. the
difference in loudness between the loudest and most silent signal can
be very large. In order to hear both the loudest and most silent signal
you normally would have to turn up to volume of the headphone.
In case however you would prefer to listen at lower volume levels, it
could result in the most silent signals becoming difficult to hear: by
making use of the night mode this can be resolved.
b) 'Night Mode' menu field yellow LED:
lights up whenever Night mode is possible
c) 'NIGHT' indicator green LED:
lights up whenever Night mode is activated
a) button to toggle the DBB function
b) 'DBB' menu field illuminated by yellow LED
c) 'DBB' indicator green LED: lights up whenever DBB is active
a) 2 x 6.3mm headphone jack sockets
b) rotary volume control
a) button to switch the digital wireless transmission function on/off (at
power-on the default is: wireless transmission on)
b) 'Transmit' menu field yellow LED
c) 'Transmit ON' indicator green LED:
lights up whenever the wireless transmission is activated
a) AC connector for AC power cord
a) stereo input (L/R)
b) stereo output (L/R) providing AASR function
c) 2-position slide-switch to select the analogue input-GAIN
(+6dB/0dB):
– set to +6dB in case of weak audio input signals
– set to 0dB in case of distorted audio input signals
ENGLISH 17