Material Specifications; Machine Specifications - SEAL 62Base Manuel D'utilisation

3.3

Material specifications

Maximum width:
Process up to 40°C (104 °F)
Maximum roll diameter:
Material unwind (upper unwind)
Material unwind (bottom unwind)
Release liner wind-up
Maximum panel thickness:
Roll core inside diameter:
3.4

Machine specifications

Power supply requirements:
Europe
USA
For the correct supply voltage version refer to the identification label on the machine.
Standard number of shaft positions:
Material unwind
Release liner wind-up
Optional features:
Nip setting:
Pressure:
Process speed:
Maximum
Slow mode
Maximum roller temperature:
Noise level
12
Metric
1600 mm
240 mm
305 mm
160 mm
50 mm
76.2 mm
1N/PE 230VAC +/- 10%, 50/60Hz, 8.5A
1N/PE 115VAC +/- 10%, 50/60Hz, 15.0A
(NEMA 5-20 plug supplied)
2 (auto-grip)
1
0–52 mm
0.3–1.0 N/mm
5 m/min
0.6 m/min
40 °C
<70 dB(A)
American
63 in.
9.4 in.
1 ft.
6.3 in.
2.0 in.
3.0 in.
0 – 2.05 in.
1.71 – 5.71 lbf/in.
16.4 ft/min
2.0 ft/min
104 °F
User Manual 62Base