Specifications; Identification; Machine Dimensions - SEAL 62Base Manuel D'utilisation

3 SPECIFICATIONS

3.1

Identification

The machine identification label (example in Figure 4) is located at the bottom of the right-hand
cabinet, on the rear side of the machine.
This label indicates the model (version) and the rated power of the machine.
CAUTION: THE POWER SUPPLY MUST BE ABLE TO PROVIDE THE RATED
POWER ACCORDING TO THE ELECTRICAL CODE REQUIREMENTS FOR THE
AREA OF INSTALLATION. CONSULT YOUR LOCAL ELECTRICIAN FOR THE
POWER SUPPLY REQUIREMENTS.
Figure 4: Machine identification label (example).
3.2

Machine dimensions

Uncrated:
Width
Height
Depth (excl. table)
Depth (incl. in-feed table)
Working height
Weight
Crated:
Width
Height
Depth
Weight
Working area:
Width
Depth
Note:
Anti-static clothing and footwear of the operator and an anti-static floor coating will help reduce
the build-up of electrostatic charges (ESD).
A relative humidity of at least 70% also helps reducing ESD-build-up.
Specifications
Metric
207 cm
132.6 cm
47.7 cm
63.5 cm
90 cm
252 kg
216.5 cm
162 cm
90 cm
293.4 kg
358.5 cm
190 cm (75 in.) + 2x maximum board length
American
81.5 in.
52.2 in.
18.8 in.
25 in.
35.4 in.
556.3 lbs
85.2 in.
63.8 in.
35.4 in.
646.5 lbs
141.5 in.
11