Material Specifications; Machine Specifications - SEAL 62Pro Manuel D'utilisation

3.3

Material specifications

Maximum width
Process up to 50°C (122 °F)
Process up to 125°C (257 °F)
Maximum roll diameter
Material unwind (top and upper unwind)
Material unwind (top unwind only)
Material unwind (bottom unwind)
Release liner wind-up
Maximum panel thickness
Roll core inside diameter
3.4

Machine specifications

Power supply requirement
Europe
USA
For the correct supply voltage version refer to the identification label on the machine.
Standard number of shaft positions
Material unwind
Release liner wind-up
Unwind/wind-up
Optional features
Easy-feed table
Slitters
Extra plot unwind for 2" and 3" cores (only in combination with standard in-feed table)
Cooling device
Nip setting
Pressure
Process speed
Maximum
Slow mode
Maximum roller temperature
Noise level
16
Metric
1575 mm
1524 mm
200 mm
305 mm
305 mm
180 mm
38 mm
76.2 mm
3N/PE 230VAC +/- 10%, 50/60Hz, 16A
2W+G 230VAC +/- 10%, 50/60Hz, 35A
1 (auto-grip)
1 (auto-grip)
3 (auto-grip)
0–40 mm
1–2.5 N/mm 5.71–14.28 lbf/in.
6 m/min
0.6 m/min
130 °C
<70 dB(A)
American
62 in.
60 in.
8 in.
1 ft.
1 ft.
6 in.
1.5 in.
3 in.
9
0–1 / in.
16
20 ft/min
2 ft/min
266 °F
User Manual 62Pro