Specifications; Identification; Machine Dimensions; Uncrated - SEAL 62Pro Manuel D'utilisation

3 SPECIFICATIONS

3.1

Identification

The machine identification label (example in The power supply must be able
to provide the rated power according to the electrical code requirements for
the area of installation. Consult your local electrician for the power supply
requirements.
Figure 5) is located at the bottom of the right-hand cabinet, on the rear side of the
machine.
This label indicates the model (version) and the rated power of the machine.
CAUTION: The power supply must be able to provide the rated power
according to the electrical code requirements for the area of installation.
Consult your local electrician for the power supply requirements.
Figure 5: Machine identification labels (example).
3.2

Machine dimensions

3.2.1

Uncrated

Width
Height
Depth (excl. in-feed table)
Depth (incl. Standard in-feed table)
Depth (incl. Easy-feed table)
Working height
14
Metric American
222 cm
143 cm
45 cm
62 cm
87 cm
90 cm
User Manual 62Pro
87.4 in.
56.3 in.
17.7 in.
24.4 in.
34.3 in.
35.4 in.