Basic Functions
Recording Function
You can record from a CD, radio broadcast, or
an external source to a USB storage device.
1. Connect an external USB storage device to the
USB (
) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the SOURCE button on the main unit to select
the DVD/CD function.
• Press the OPEN/CLOSE button to open the disc
tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use t he CD selection ( [ or ] ) buttons to select
the desired song.
Tuner
• Select FM by pressing the SOURCE button.
• Tune to a station you want to record.
External Source
• Conn ect an External Component/MP3 player to your
product.
• Press the SOURCE button to select <AUX> input.
• Pla y a song from the external device.
3.
Press the USB REC button to start recording.
CD
• "TRACK RECORDING" is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3/WMA/PHOTO/DivX-RECORD DISC
• Press the USB REC button, the current playing file
is copied onto the USB device.
• To copy a music folder, highlight desired folder first
and press USB REC button, the folder is copied.
COPY: "CHECK""START""COPY XX"
"COPY END" is displayed. When the copy is done,
"STOP" will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• TUNER: TUNER RCORDING" -->"RECORD"
• AUX: AUX RECORDING" -->"RECORD"
4. To stop recording, press the
automatically creates and saves recorded files in
.MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the
After recording, a directory
button once again.
named "RECORDING(DISCxxxx)"(FULL CD
RECORDING), "RECORDING"(TRACK
|
24
English
| NOTES |
\
\
\
\
\
\
\
\
\
\
\
\
Recording Speed
You can select the recording speed before recording.
1. Each time you press the CD REC SPEED
| NOTES |
5
button. The unit
\
5
\
RECORDING), "CD COPY"(MP3/WMA/
PHOTO/DivX-RECORD DISC), "TUNER
RECORDING" or "AUX RECORDING" is
created in your USB device.
Do not disconnect the USB or the AC Cord during the
recording as this may cause damage to the file.
If you disconnected the USB device during a
recording, the main unit powers off and you will not be
able to delete the recorded file from your USB device.
If this occurs, please connect the USB device to a PC
and backup the USB data to the PC first, and then
format the USB device.
When the USB memory has insufficient free space, the
system will display "NOT ENOUGH MEMORY".
The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system
is not supported.
When you use the CD high speed search function, CD
recording is not available.
Sometimes, the recording time may be longer with
some USB devices.
The equalizer and power bass is set to "OFF"
automatically and is not available during a CD
recording.
The REPEAT function is set to "OFF" automatically and
is not available during a CD recording.
You can not record the radio when searching or no
available station is found in the Tuner mode.
Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device's
volume level.
The maximum TUNER/AUX recording time is 5 hours.
Up to 300MB of a video file can be copied.
button on the remote control, the recording
speed will change as following:
NORMAL SPEED RECORD ; HIGH SPEED
RECORD
When you record from the tuner or an external source,
you cannot change the recording speed.
If you select
HIGH SPEED RECORD
produced during the recording.
, sound is not