Basic Functions; Playing A Disc; Resume Function - Samsung DVD-H1080 Manuel D'utilisation

basic functions

Playing a disc

Before Play
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV's
remote control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and
set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWer button, the
screen to the right appears: If you want to select a language, press the π/† button,
and then press the ENTER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want
to use.
Once you select a menu language, you can change it by pressing the (
the front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SeLeCt MenU LAngUAge window appears again where you can reset your
preferred language.
Playback
1
Press the OPen/CLOSe ( )
button.
The STANDBY indicator
light goes out and the tray
opens.

Place a disc gently into the
tray with the disc's label
facing up.

Press the PLAY ( ) button
or OPen/CLOSe ( ) button
to close the disc tray.
All manuals and user guides at all-guides.com
Select Menu Language
)button on

reSUMe function

When you stop disc play, the player remembers
where you stopped, so when you press the
PLAY ( ) button again, it will pick up where you
left off.
English
Français
Deutsch
Español
Italiano
Nederlands
English _1