About This Manual; Typographical Conventions; Notes On Copyright And Information On Trademarks; Safety Rules - Videotec NXM36 Manuel D'instructions

1 About this manual

Before installing and using this unit, please read this
manual carefully. Be sure to keep it handy for later
reference.

1.1 Typographical conventions

DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The quoted names of products or companies are
trademarks or registered trademarks.

3 Safety rules

• The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves the right
to modify its contents without any prior notice.
The documentation contained in this manual has
been collected with great care. The manufacturer,
however, cannot take any liability for its use. The
same thing can be said for any person or company
involved in the creation and production of this
manual.
MNVCNXM36_1511_EN
CAUTION! The device must be installed
only and exclusively by qualified technical
personnel.
• Before starting any operation, make sure the
power supply is disconnected.
• Do not use cables that seem worn or old.
• Never, under any circumstances, make any
changes or connections that are not shown in
this handbook. Improper use of the appliance
can cause serious hazards, risking the safety of
personnel and of the installation.
• Use only original spare parts. Non-original spare
parts could cause fire, electrical discharge or other
hazards.
• Before proceeding with installation, check the
supplied material to make sure it corresponds
to the order specification by examining the
identification labels (4.2 Product markings, page 3).

4 Identification

4.1 Product description and type
designation
The NXM36 housing has been developed for
installations in highly corrosive areas such as
industrial chemical, petrochemical, marine,
naval and offshore platforms; entirely realized of
electropolished and passivated AISI 316L stainless
steel for maximum protection against deterioration.
Weatherproof IP66/IP68, it provides a complete
protection against dust and it's submersible down to
40m (130ft).
The options of wiper and water pump ensure a
constant cleaning of the front window
For the coldest environments down to -40°C (-40°F),
the range includes a specific version with reinforced
heater.
The NXM36 housing can be installed on NXPTH Pan &
Tilt head, to obtain a complete positioning system.

4.2 Product markings

See the label attached to the product.
3