Microwave And Convection" Mode; Cooking Program" Mode - CASO DESIGN MCDG 25 Master Mode D'emploi Original

13.14 "Microwave and convection" mode

The device offers four pre-programmed settings, which facilitate combination cooking
using hot air (convection) and microwaves.
 Setting the temperature
Select the temperature you require by pressing the Micro + Convection
button until you reach the level you require (see following table).
Setting the cooking time

Set the cooking time by turning the Time/Menu control dial.
 Starting the cooking programme
After selecting the program, press the button Start/Quick Start, to start the
preset cooking programme.
End of the cooking programme

Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
Please note
► You can check the hot air temperature during cooking by pressing the button Micro +
Convection.
Button presses Display
1 200
2 170
3 140
4 110

13.15 "Cooking Program" Mode

In this operating mode, the cooking programme can be selected from 9 different menus. A
list of possible programme is engraved on the operating panel. Please refer to the table on
the next page for more detailed information.
 Selecting the Program
First turn the Time/Menu knob briefly anticlockwise and then clockwise to
select the desired program.
 Setting the quantity / weight
Select the quantity/weight you require by pressing the Time/Weight button
until you reach the level you require (see following table).
 Starting the cooking programme
After selecting the program, press the button Start/Quick Start, to start the
preset cooking programme.
caso MCDG 25 Master (black)
Temperature
200°C
170°C
140°C
110°C
60