Troubleshooting - Atag MA3011C Mode D'emploi

troubleshooting

what if.....
If you're not sure that your oven is working properly, it doesn't necessarily mean that there's a problem. In all cases, check
the following points:
IF YOU REALIZE THA T
The oven isn't heating
The light inside the oven isn't
working.
The cooling fan keeps working
after the oven is turned off.
The oven light stays on even
when the oven is switched off
The oven makes noises after
cooking is finished.
The oven gives off sparks.
The food does not get hot
when in microwave mode.
In all cases, if you are unable to solve the problem yourself, please cont act the After-Sales Ser vice
without delay.
GB 16
POSSIBLE CAUSES
The oven isn't connected to the power
supply.
The fuse has blown.
Other causes.
The lamp is unusable.
The oven isn't connected to the power
supply or the fuse has blown.
The fan will stop three minutes after the
end of cooking.
If it has not stopped after 1 hour
1. The oven door is not closed correctly.
2. There is a faulty component in the
microwave circuit.
The fan in the top of the oven (invisible)
works even when the oven has stop-
ped.
There is a metallic element too near a
wall or the rack.
Microwaves are not reaching the food.
The door is not shut correctly.
WHA T SHOULD YOU DO?
- Connect to power supply.
- Change the fuse, checking that it is
16A.
- Contact the After-Sales Service.
- Change the bulb.
- Connect to power supply or change fuse.
- NOTHING.
- Contact the After-Sales Service.
1. Check that the door is completely closed.
2. Call the After-Sales Service.
- This is normal as your oven is fitted
with a fan that runs for 3 minutes after
the end of cooking.
- Remove all metal elements from close
to the walls.
- Never use a metal element with the
rack.
- Check that your utensils are compati-
ble with microwave ovens.
- Check that door shuts correctly.