Using The Child Safety Feature; Setting The Display To Stand-By Mode - Atag MA3011C Mode D'emploi

how to use your oven
using the memory feature
how to use your oven

using the child safety feature

how to use your oven

setting the display to stand-by mode

GB 10
For starting off a memorized cooking program:
-Press on M1 or M2.
- Cooking starts immediately.
- To stop cooking during the program, press on the START/STOP
control.
NOTE : Putting your favourite cooking programs into memory can be
repeated as often as you want.
In order to prevent your oven being turned on unintentionally, you may
lock the controls.
To do this:
- Press on the START/STOP touch control until it bleeps.
Keep pressing on the touch control until the bleep stops and a key
appears
-To unlock the controls, repeat the operation.
(key)
-Press the START/STOP touch control until you hear a long bleep.
Keep your finger on the touch control until the bleep stops and
the
NOTE: Only the "separate timer" program remains operational.
To reduce your oven's power consumption to a minimum when it is not
in use, you can put your readout system in STANDBY MODE.
To carry out this operation, proceed as follows:
GOING INTO STANDBY MODE:
- Your oven must be in normal time readout mode.
- Press both the + and - controls for five seconds at the
same time.
- The display reads "Lcd off".
- Take your fingers off the two controls.
- 30 seconds later your readout will switch off.
Your oven is now in standby mode; whenever you are in the normal time
readout mode, it will turn off automatically after 30 seconds.
COMING OUT OF STANDBY MODE:
- Your oven must be in the normal time readout mode.
- Press the + and - controls for five seconds at the
same time.
- The display will then read "Lcd on".
- Take your fingers off the two controls.
- You are now out of the STANDBY MODE; the readout is now perma-
nently lit.
on the indicator panel.
key disappears from the display panel.