Customising The Power Level; Using The Memory Feature - Atag MA3011C Mode D'emploi

how to use your oven

customising the power level

You can select the power you want to use in the first cooking mode. when
you select your cooking mode or during cooking
Press touch control W, for 2 seconds.
The oven will bleep, and the power read-out figures flash.
Programme the oven for the power you require using the + or - controls.
Confirm with the START/STOP button.
This programme will be kept in memory for subsequent cooking sessions.
You can re-programme your oven whenever you want.
how to use your oven

using the memory feature

Your oven is equipped with two memorization touch controls, M1 and M2 for
keeping your two most often used cooking programmes in memory.
Memorization can be used in the modes
In the mode you can memorize both the power and the cooking time.
allow you to memorize the cooking time only.
Example of use in mode :
- Select mode
- Set your cooking time with the + and -controls,
E.g. 2 minutes
- You can record your setting by pressing M1 and M2 for 2 seconds.
- The oven will bleep twice to confirm your choice M1 or M2 will light up.
- You can leave the memorization mode by pressing START/STOP for a
few seconds.
- After selecting your cooking time, if you are in mode , you can also
memorize the cooking power.
- After selecting the cooking time, press the W. control W will flash.
- Set the power you require with the + and - controls.
E.g. 800w
- Register your setting by pressing M1 and M2 for a few seconds.
The oven will bleep twice to confirm your choice; M2 will light up.
- Leave the memorization mode by pressing START/STOP for a few sec-
onds.
GB 9