Passion Dream 7 Mode D'emploi page 41

The spa does not get warmer
- The spa may not be set properly. Set the desired spa temperature.
Perhaps the spa needs more time. The spa warms up about half a degree per hour.
- The air controls are opened. The spa needs more time to warm up in this manner.
Close the air controls.
- The Mode button is set to SLP = Sleep. The tub does not heat up on this 'vacation setting' .
See display instructions.
- The Mode button is on ECO = Economy. The tub only heats up in the filter period in this setting.
See display instructions.
Water is too hot
The temperature may not be set properly. Set the desired spa temperature.
The temperature sensor is no longer in the correct spot or is broken. Consult the dealer.
No water is coming from the jet
- The jet is set to close. Open the het by turning it to the right.
- The jet is not applied correctly. Turn the jet to remove it, then reapply it.
Water leak
- Too much water was added to the spa. Let some water drain from the spa.
- This is condensation. Pay attention when removing the cover.
- A pipe or connection is leaking. Contact your dealer
41