Passion Dream 7 Mode D'emploi page 18

More information to adjust temperature settings for each 'RANGE
in the section Parameters.
Filtration cycles
Filtration cycles can be adjusted in the display menu of your spa. There are two cycles to be
adjusted with the following adjustments:
• Start time of each filtration cycle
• Length of each cycle.
More information on adjusting these cycles can be found in the section Parameters.
Adjusting the temperature
The current temperature is displayed continuously in Standard mode. If the spa is set in Economy
or Sleep mode, the display of the temperature is switched to the selected mode, to let you know
which mode is selected. You can set the temperature by pressing the Warm
button. By pressing one of these buttons once, the temperature is adjusted by 0,5°C. The inserted
temperature value is saved after 3 seconds automatically.
Jets 1
When pressing the Jets 1
will be shut down.
Jet 2 (only applicable if your spa is equipped with 2 or 3 pumps)
Explanation for spas equipped with two pumps
When pressing the Jets 2
pressed again, pump 2 is shut down.
Explanation for spas equipped with 3 pumps:
When pressing the Jets 2
pump 3 will be initialized, as well as pump 2. When pressing the Jets 2
2 will be shut down, however 3 remains functioning. When pressing the Jets 2
will be shut down as well.
Blower (only applicable for spas with a blower)
By pressing the Blower
again, the blower will be shut down.
Light
By pressing the Light
colors. To select the color of your liking, press the lighting button multiple times until selecting the
color you prefer. Please wait one second between each time pressing the light button. The transfor-
mer will then adjust the color automatically. The spa will turn off the lights automatically after 4 hours.
button, pump 1 will be initialized. When pressed again, the pump
button, pump 2 will be initialized. If the Jets 2
button, pump 2 is initialized. If you press this button a second time,
button, the blower is initialized. By pressing the Blower
button, the lighting will be turned on/off. You can choose between many
' or 'RANGE ' can be found
or Cool
button is
button again, pump
again, pump 3
button
18