Passion Dream 7 Mode D'emploi page 30

Setting the Salt System
The display panel of the system can be read if jet 1 is at a low speed. Set the filter period to 6
hours per 12 hours (for the Economy-Line, it is always set to 5 hours per 12 hours).
Twist the push-button of the salt system to the right to level 10 (for the Prestige Lounge and Torna-
do to level 7). The display panel shows "+" or "-" , this normally means that the machine is cleaning
itself.
Test the free bromine value after about 72 hour, see number (2), with the Aquacheck total bromine
test strips. If the value is more than 3 ppm, bring back the filter period to 4 hours per 12 hours.
Retest after 72 hours. If the value is above 2-3 ppm, twist the push-button back one level. (now 9).
Subsequently, test every 3 days and turn the push-button back one level each time per 72 hours
until the ideal value of 2-3 ppm is reached.
If the free bromide value remains under 2 ppm, keep the level at 10 and lengthen the filter period to
8 hours per 12 hours or continuous filtration.
After the ideal value of 2-3 ppm is reached, clean the filter once a week and test the water with the
Aquacheck test strips.
Refresh the spa's water at least once every year. Tip: Shower before using the spa.
30