Passion Dream 7 Mode D'emploi page 31

1) What to do when the total free bromine is too low?
• Use the push-button of the salt system to set the salt system to level 10.
• Set the filter time to continuous.
• If the total free bromide value is more than 2-3 ppm after 72 hours, lower the filter time (Fil 8),
so filter 8 hours per 12 hours.
• If the total free bromide value is more than 2-3 ppm after 72 hours, lower the filter time (Fil 6),
so filter 6 hours per 12 hours.
• If the total free bromide value is more than 2-3 ppm after 72 hours, lower the filter time (Fil 4),
so filter 4 hours per 12 hours.
• If the total free bromide value is more than 2-3 ppm after 72 hours, twist the push-button of the
salt system back 1 level (from 10 to 9).
• Subsequently repeat the testing every 72 hours and try to find a level for which the bromide-
value is not lower than 2 ppm and not higher than 3 ppm.
2) What to do when the total free bromine is too high?
• Lower the filter time 2 hours to 23 hours (to minimally 4 hours per 12 hours).
• If the value is still too high after 72 hours, continue to lower the filter time with 2 hours
per 12 hours.
• Repeat this every 72 hours until the filter level is minimally 4 hours per 12 hours.
• If the value is still too high after 72 hours, twist the rotary knob back 1 level.
• Repeat this every 72 hours until a level is found for which the bromide-value is
not lower than 2 PPM and not higher than 3 PPM.
3) What to do when the PH-value is too low?
• Use PH+ if the value is below 7.0.
• Thoroughly read the instructions on the package.
• A PH balance that is too low could cause irritation to the eyes and damage to the spa.
4) What to do when the PH-value is too high?
• Use PH- if the PH value is more than 7.5.
• Thoroughly read the instructions on the package.
• A PH balance that is too low could cause irritation to the eyes and the bromide to stop working.
5) What to do when the alkalinity is too low?
• Use Total Alkalinity Control (TA+), if the alkalinity is below 80 PPM.
• Contact your dealer first.
• Read the instructions before use.
31