Passion Dream 7 Mode D'emploi page 32

6) What to do when the alkalinity is too high?
• Use PH- if the alkalinity is higher than 140 PPM.
• Read the instructions before use.
7) What to do when the total lime content of the water is too low?
• Use Calcium Booster if the total lime content of the water is lower than 100.
• Read the instructions before use.
Troubleshooting
Problem
Green water
Yellow water
Foggy water
Smelly water
Foamy water
Slippery inside the Spa
Irritated eyes
Cause
PH-value could be too low
Algae
Bromide-value is probably too
high
PH-value is too high and/or the
Bromide-value is too low
PH-value is too high and/or the
Bromide-value is too low
PH-value is too high and/or the
Bromide-value is too low
Soap residue in the water
Hair gel or lotion in the water
PH-value is too high and/or the
Bromide-value is too low
PH-value is too high and/or the
Bromide-value is too low
Solution
Check the PH-value and the alka-
linity-value
Check all 4 values with the
Aquacheck Test strips
Check all 4 values with the
Aquacheck Test strips for a solu-
tion to a bromide-value that is too
high
Check all 4 values with the
Aquacheck Test strips
Aquacheck Test strips
Check all 4 values with the
Aquacheck Test strips
Rinse swimming gear thoroughly
without soap
Shower thoroughly before using
the spa
Check all 4 values with the
Aquacheck Test strips
Check all 4 values with the
Aquacheck Test strips
32