PURE Elan DAB+ Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Time/Date
The time and date can be updated manually or automatically With auto-update, the time and
date are automatically broadcast over DAB and FM (when available).
You can also select the display format for the time and date.
The Time menu contains the following options:
Set Time/Date – (see below)
Auto update - Update from Any | Update from digital radio | Update from FM | No Update
Set 12/24 hour - 12 | 24
Set date format - DD-MM-YYYY | MM-DD-YYYY.
Set time/date
This option is for manually setting the time and date displayed.
The date displays as DD-MM-YYYY or MM-DD-YYYY depending on your choice of date format
(see above).
Adjust each value using the select control button and press Select to confirm. The next value
then becomes active and flashes. The time values follow and are set in the same way.
The time displays as hh:mm, with the first value, hh, active (flashing).
Backlight
The Elan DAB+ has a backlight with three brightness settings, and adjustable timeout (this is the
time delay, in seconds, after which the display switches to the Dim level).
There are three settings:
Timeout - On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 sec
On level - High | Medium | Low
Dim level - High | Medium | Low
Language
The default language is English. To change, select Menu > System settings > Language >then
select your language.
Factory reset
A factory reset clears all user defined settings, replacing them with the original default values, so
time/date,preferences/ settings and DAB station list are all lost.
If you select Factory reset, you are asked to confirm by selecting "Yes".
EN

Publicité

Table des Matières
loading

Table des Matières