System Settings - PURE Elan DAB+ Mode D'emploi

Sleep
To set the sleep timer while the radio is playing use the select control button to select Menu -
System Settings - Sleep. You can choose the sleep delay time in minutes from:
Sleep Timer Off | 15 |30 | 45 | 60 | 90.
Use select control button to cycle through the options then press Select to choose the displayed
option.
Once you select a sleep delay period, the display returns to the Now playing screen displaying a
Crescent moon icon and the remaining time, in minutes, before the sleep time expires.
After the sleep delay period the radio switches to standby mode.

System Settings

The System Settings allow you to tailor the Elan DAB+ with a variety of options to suit you.
To access system settings from any mode Select Menu >System Settings >, then choose from the various
options as described in the menu as below.
The System Setting Menu options are:
Sleep
Alarm
Equaliser
Time/Date
Backlight
Language
Factory Reset
Software Update
Software Version
To navigate through the menus
The following controls are used to move about the menu tree to choose and select the required
settings:
Select – (pressing the Select control button) this selects the currently displayed option, if the
option has a further sub-menu the first option of the sub-menu is displayed. If the option is a
setting value, the displayed value is selected and either the next setting is highlighted or, if there
are no further settings, the display returns to the parent menu for that setting.
Select control button – cycles forwards and backwards through the current menu or setting
options.
Back – jumps back to the parent menu of the currently displayed menu or setting.
Menu to return to the Now Playing screen.
Equalizer
This presents a My Equaliser option to allow you to create your own equaliser settings.
Normal
Classic
Jazz
Pop
Rock
Speech
My EQ
My EQ setup
This option allows you to set a bias in the treble and bass audio frequencies and turn 'Loudness'
On or Off. Values can be set between -5 (Minus 5) and +5 (plus 5).
Treble – (Use the select control button to choose a bias value between -5 and +5)
Bass – (Use the select control button to choose a bias value between -5 and +5)
Loudness – No or Yes. (When Yes, low-level high and low frequency sounds are boosted
to give a 'fuller' sound.)
EN