Digital Radio - PURE Elan DAB+ Mode D'emploi

Setting up
Elan DAB+ is easy to use. To play DAB or FM radio, all you need is a USB power source;
A. Place Elan DAB+ on a suitable surface.
B. Extend the telescopic antenna.
C. Connect the supplied USB cable between Elan DAB+ and a USB power adaptor*.
*Not included
Time/date
The time and date can be updated manually or automatically.
Auto
Auto-update works with data sent over DAB, FM. The clock is only updated when in a corresponding
mode, so it is best to select a mode you use regularly.
Manual
If you set No update, the wizard now prompts you to set the time and date manually. The date is
displayed as DD-MM-YYYY and MM-DD-YYYY.
Sources

Digital Radio

Digital Radio
To enter Digital Radio mode, press Source until the display shows Digital Radio.
Scanning for stations
The first time you use Elan DAB+, or if the station list is empty, the radio automatically
performs a full scan to see what stations are available. You may also need to start a scan
manually to update the list of stations for one of the following reasons:
USB A
C
New stations may become available from time to time.
If reception was not good for the original scan (for example the antenna
was not up), this may result in an empty or incomplete list of available
stations.
If you have poor reception of some stations causing the audio to break
up, you may wish to list only stations with good signal strength.
B
A
EN