Campbell Hausfeld CE1000 Mode D'emploi page 13

120V CONFIGURATION
[Brown]
[Orange]
[White]
[Yellow]
[Black]
[Purple]
Figure 10
All wiring and electrical sconnections hould be performed by a qualified electrician. Installation
must be in accordance with local codes and national electrical codes. If not properly grounded,
this tool can cause an electrical shock, particularly when used in damp locations, in proximity of plumbing, outdoors.
Installation of grounding plug can result in electric shock. When repair or replacement of the
cord or plug is required, do not connect the grounding wire to either flat blade terminal. The
wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire. Never
connect green (or green and yellow) wire to a live terminal.
Check with a qualified electrician or serviceman when the grounding instructions are not completely
understood, or when in doubt as to whether the product is properly grounded. Do not modify the plug
provided; if it does not fit the outlet, have the proper outlet installed by a qualified electrician. Only
connect the product to an outlet having the same configuration as the plug. Do not use an adapter with
this product.
240V CONFIGURATION
[Orange]
Black
[White]
Cord
[Yellow]
Lead
[Black]
[Purple]
White
Cord
[Brown]
Lead
11
Black
Cord
Lead
White
Cord
Lead