Connect Menu - DeFelsko PosiTector SHD Mode D'emploi

WiFi
Allows connection to your local wireless network or mobile hot
spot. Ideal for using your network's internet connection for
synchronizing stored measurements with PosiSoft.net (pg. 7).
See www.defelsko.com/wifi
USB
When USB Drive is checked
USB mass storage device class which provides users with a
simple interface to retrieve stored data in a manner similar to
USB flash drives, digital cameras and digital audio players.
USB Drive is also required to import stored measurements into
PosiSoft Desktop software.
NOTE:
When connected, power is supplied through the USB
cable. The batteries are not used and the body will not
automatically power down. If rechargeable (NiMH) batteries are
installed, the instrument will trickle charge the batteries.
Keyboard
When enabled and connected to a computer, the PosiTector will be
recognized as a Keyboard. Readings are sent to the computer as
they are taken, emulating keystrokes, followed by a carriage return.
Stream
Stream individual readings to a USB connected computer via a
serial protocol. Ideal for use with serial compatible SPC data
collection software.
For more information on USB Keyboard and Streaming
NOTE:
visit: www.defelsko.com/usb/stream
Bluetooth
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
Sync .net Now
The above WiFi, USB and Bluetooth menus contain a
Sync .net Now option. When selected, the Gage immediately
synchronizes stored measurement data via its respective
communication method (internet connection required). Alternatively,
select Auto Sync .net from within the USB connect menu to

Connect Menu

Connect Menu
(Advanced models only)
(Advanced models only)
8
, the PosiTector gage uses a