DeFelsko PosiTector SHD Mode D'emploi page 10

automatically synchroniz e upon connection to a PC. Additional
measurements added to memory while connected are synchronized
only when the USB cable is disconnected and reconnected, or when
the Sync .net Now option is selected. WiFi connected gages
automatically attempt synchronization upon power-up.
NOTE:
PosiSoft Desktop is required when using USB
connections to synchronize measurements with PosiSoft.net.
Bluetooth Smart
When Enabled
running the PosiTector App (see Accessing Stored
Measurement Data, pg. 7) via auto-pairing Bluetooth Smart
(BLE) wireless technology.
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart is
enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
batches to the PosiTector App. Only readings and
selected
batches that have yet to be synchronized with any smart device
are synchronized automatically.
NOTE:
If Bluetooth Smart is disabled, data from batches
selected in the Sync Batches menu are held in a queue until
communication with the PosiTector App is re-established.
Send Batches
Transfers selected
when switching between devices).
The send batches option is visible in the menu when the Gage
is connected to a smart device running the PosiTector App.
Updates
Determine if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
update (pg. 5). All stored measurements will be erased from
memory.
(Advanced models only, serial numbers 784000 and greater)
, allows communication with a smart device
batches to the PosiTector App (useful
The Gage will perform a Hard Reset after an
9