Alarm Mode - DeFelsko PosiTector DPM L Mode D'emploi

PosiSoft USB Drive
The PosiTector gage uses a USB mass storage device class
which provides users with a simple interface to retrieve stored
data in a manner similar to USB flash drives, digital cameras and
digital audio players.
Connect the Gage to a PC/Mac using a USB cable. View and
print readings and graphs using universal PC/Mac web browsers
or file explorers. No software or internet connection required.
USB Drive must be checked
menu.
PosiSoft.net
Web-based application offering secure, centralized storage of
measurement data. Synchronize measurement data from the
PosiTector gage and access it from any web connected device.
More detailed instructions are available in the PosiSoft.net Help
File, located at: www.defelsko.com/posisoftnethelp
When the PosiTector DPM L is connected to a PosiTector
Advanced gage, Alarm Mode can automatically alert the user
when current climatic conditions exceed pre-set values. According
to ISO 8502-4 and ASTM D3276, steel surface temperatures
should generally be 3°C (5°F) above the dew point temperature
when painting. The Alarm Mode can be used in conjunction with
Logging Mode.
When enabled, the Alarm icon
at the top of the screen and allows the user
to setup custom alarm conditions for each
parameter.
To enable Alarm Mode, select Alarm from
the gage's Setup menu.
(PosiTector Advanced gages only)

Alarm Mode

Alarm Mode
(PosiTector Advanced gages)
in the Gage's "Connect > USB"
is displayed
8