DeFelsko PosiTector DPM L Mode D'emploi page 5

Once connected, the probe LED will flash every 3 seconds and
the PosiTector DPM L will automatically download any previous-
ly logged datasets to the PosiTector gage. The battery icon at
the top right corner shows the battery level of the probe. Ensure
that the desired temperature Units are selected.
The user can now Start Logging (see Logging Mode pg. 5),
open View Live Data, View Logged Datasets (pg. 6), enable
Alarm Mode (pg. 8), or change the temperature Units.
NOTE:
The first time a probe is connected, the instrument will
display in View Live Data. Once datasets have been logged, the
last logged datasets will be displayed.
More detailed instructions on using the PosiTector gage body
are available in the PosiTector DPM manual, located at
www.defelsko.com/manuals
Units
By default, PosiTector DPM L probes display and record
temperature in Celsius (°C). To convert displayed temperature to
Fahrenheit, select Units from the PosiTector App or PosiTector
Advanced Setup menu.
Changing units will delete all existing readings from
the probe's memory.
To view current sensor readings, select View Live Data from the
PosiTector App or PosiTector Advanced gage menu. Below is
an example of Live Data view.
View Live Data
4
SmartTrend
Indicators