Settings Menu - VOLTCRAFT IPC-8 Notice D'emploi

10. Settings menu

You can use the charger firmware to set the battery type, charging
mode and charge/discharge parameters. The settings menu can also
be used to configure other features (e.g. the display brightness).
• Press and hold the settings button (6) for approximately 1 second to
access the settings menu.
• Use the down ▼ (7) and up ▲ (5) buttons to navigate through the
menu. Briefly press the settings button (6) to select a menu option.
• Use the down ▼ (7) and up ▲ (5) buttons to navigate through
the sub-menu. Press the settings button (6) to select and confirm
a setting.
• Briefly press the settings button (6) to go back to the main menu.
The current setting will be applied.
Overview of settings
Menu
Task
Battery type
Sub-menu
Charge
Discharge
Activation
Analysis
Auto
NiMH
NiCd
Eneloop
Li-Ion
NiZn
LiFePO4
LiHv
Meaning
Select the desired operating
mode.
Select the type of battery that you
want to charge.
33