Display; Setup - VOLTCRAFT IPC-8 Notice D'emploi

8. Display

E
D
C
B
A

9. Setup

Before using the charger for the first time, remove the protective
film from the LCD display (2).
• Use a USB cable to connect the USB Type-C port (1) on the charger
to a USB port (computer, charging hub or charger with a USB voltage
of 5 V - 12 V/DC, e.g. Qualcomm Quick Charge 3.0 charger). The
LCD display (2) will turn on and you will hear a sequence of tones.
Connect the charger to a USB 3.0 port. The current delivered by
USB 2.0 ports is not sufficient to power the charger.
32
A Selected process complete
(in the four operating
F
modes)
G
B Battery slot free
H
C Current battery level in %
I
D Battery slot number
E Battery type
J
F Capacity indicator
K
G Charging duration in this
L
mode
H Voltage/current display for
the battery compartment
I Resistance/temperature of
the inserted battery
J Voltage curve (graph)
K Selected mode
L Input voltage/power of the
charger