Important - FUAVE SV7010 Manuel D'instructions

IMPORTANT

Do not use the fan in a bathroom or wet area. Find a stable, horizontal place
for the fan in the vicinity of a wall socket. Place the Fuave SV7010 on the
ground. Ensure that the fan is not within the reach of children. Never stick
objects through the grid. Always unplug the fan from the wall socket before
you move it or carry out maintenance on it!
OPERATION
The fans can be set to different speeds: The Fuave SV7010 has three set-
tings. All types of fan are equipped with an oscillation function (75°).
If you would like to angle the fan upwards or downwards, the motor block
can be angled further up or down in relation to the foot. Before doing so,
however, turn off the fan and remove the plug from the socket!
If: - the fan has been fully assembled
- all connections have been properly secured
- all safety guidelines have been taken into account you can
use the fan.
Plug it into the wall socket.
1.
2.
3.
On/off switch
Push this switch to turn the fan on at its
default speed. A second push = switch-
off. If not using the fan for longer than a
few minutes then unplug it from the
wall socket.
Speed button
Pressing this button switches the fan
speed to fast and then to extra fast.
Ventilatie-wijze
By pressing this button you can switch
from a constant air flow to natural,
continuously varying ventilation. Use the
speed button to select (me, II or III) for a
different variation:
1 9