Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GENERAL
SAFETY GUIDELINES
•
Check (before use) that the socket you have chosen for the fan
corresponds to the voltage indicated on the fan's specification plate:
220-240V / 50Hz.
•
Check fan, plug and cable for damage before use. If you discover any
damage, do not use and consult a qualified person for repairs. Never
open up the device or carry out repairs yourself. Do not allow children
to play with the packaging.
•
This device is only to be used indoors.
•
First, assemble the fan fully before use. Before you assemble or
disassemble the fan first unplug it from the wall socket.
•
Ensure that the unit is always placed on a sturdy, flat and horizontal
surface during use.
•
Always turn the fan off and always remove the plug from the socket
before moving the fan, cleaning it or carrying out maintenance.
•
Never pull on the cord or roll and/or wind it too tightly.
•
Never touch the device with wet hands!
•
If the electrical cable or plug is damaged then it must be replaced by a
qualified person. To avoid accidents, never make repairs yourself.
•
Never hang anything over the fan and do not use near curtains or other
materials that could jam the motor. This could lead to overheating.
•
Never insert a finger, pen, stick or any other object through the
protective grille when the fan is in use! This could cause injury and
damage!
•
Prevent the fan from blowing continuously on small children, patients or
people that have difficulty moving.
•
Never spray products (anti-insect, cleaning spray etc) on or into the fan;
this could lead to physical illnesses (particularly in children) or damage
parts.
•
Never connect the fan to a timer or dimmer.
1 4
Publicité
Chapitres
Table des Matières
