Settings - Duco Intelli Air Valve Serie Manuel D'utilisation

ENGLISH
7

Settings

Most of the factory settings for the network and components will be
satisfactory as they are, however, depending on the situation it may be
desirable to change some parameters, such as the CO setpoint for an
2
iAV Control valve. This can be done using the Duco Network Tool.
Duco Network Tool*
This user-friendly software is the ideal way of changing settings
and pinpointing problems in the system. The Duco Network Tool is
issued to every installer after attending a free training course at the
Duco Academy. Please refer to our website or your Duco dealer for
further information.
* Only in Belgium and the Netherlands
Duco Network Tool
97