Duco Intelli Air Valve Serie Manuel D'utilisation page 88

ENGLISH
Tips
• To remove all components from the network (e.g. in the event of
problems):
Press and hold 'INST' to activate 'Installer mode'.
1
Press and hold 'INST' again to remove all components under
2
the iAV Control valve. The LED will stop flashing.
• Use the Duco Network Tool to read out information from compo-
nents. See page 97 for more information.
• Never pair components simultaneously to more than one iAV
Control valve.
• The "palm-of-the-hand" method can be used on any random
control in order to deactivate 'Installer mode' for the whole system.
Do this by touching the 4 buttons simultaneously with the palm of
your hand. The LED on each component in the network will stop
flashing.
88