Cabling - Duco Intelli Air Valve Serie Manuel D'utilisation

ENGLISH
3

Cabling

The iAV Control Valve communicates only via a wired connection with
a parent 'master' (if applicable) and only via a wireless RF connection
with 'slave' components. Wired components, for instance a wired
sensor, can therefore NOT be paired as a 'slave' under a iAV Control
valve.
Multiple iAV Control valves can be daisy-chained (= recommended).
This means that a separate cable will not be required for each compo-
nent. A single central power supply can be used.
The cable required is a 0.8 mm data cable. We strongly advise using
a shielded cable to prevent any interference that may affect the data
communication.
75