Duco Intelli Air Valve Serie Manuel D'utilisation page 86

ENGLISH
Add any window ventilators (RF only) by tapping once on the com-
6
ponent to be paired. The LED will flash green slowly.
Perform steps
to be paired in the same zone.
Pres the 'INST' button on any random slave iAV Control valve in
7
this zone. In functional terms it doesn't matter which, hence the
closest one can be chosen.
Add the remaining control components (User controller, CO
8
midity Sensor, RF only) by tapping once on any random button on
each of the control components to be paired. The LED will start to
flash green rapidly once pairing has been completed successfully.
Deactivate 'Installer mode' for the current zone by tapping once on
9
'INST' on the master iAV Control valve.
Systems with IQ-unit only:
Repeat steps
10
Activate 'Installer mode' by tapping 'INST' on the IQ-unit. The LED
11
on each component in the system will stop flashing.
Please refer to the manual with the control components for more
detailed information for each component.
86
and only if additional control components need
7 8
to inclusive for any remaining zones.
1b 9
or Hu-
2