Configuration - Duco Intelli Air Valve Serie Manuel D'utilisation

ENGLISH
6

Configuration

The system needs to be configured for it to work correctly. This helps
ensure that operation is as quiet as possible and energy-efficient. See
under the Tools heading at www.duco.eu for info about determining
ventilation flow rates.
The configuration procedure is dependent on the choice of whether to
operate with iAV as 'master' (stand-alone) or iAV as 'slave' (external
control).
Configuration with iAV as 'slave'
(EXTERNAL CONTROL)
Follow the configuration procedure which is described in the 'master'
unit manual.
Configuration with iAV as 'master'
(STAND-ALONE)
Follow the steps described in this section to install components. Con-
figuration takes place in two stages: setting exhaust vents and actual
configuration.
89