Water Supply - Zanussi ZWK 5120 Notice D'utilisation

3
4
To install your washing machine at the same
level as surrounding furniture, proceed as fol-
lows :
5

Water supply

Install the supplied water inlet hose at the rear of
your washing machine by proceeding as follows
(Do not reuse an old hose) :
1
3
Open the water inlet tap.
Check there are no leaks.
The water inlet hose can not be extended. If it is
too short, please contact the after-sales service.
Drainage
- The connector at the
1
end of the flexible hose
can be attached to all
common types of stand-
pipe.
Attach the connector to
the standpipe with the
hose clamp supplied
*
with the appliance .
- Fit the U-piece on the
2
drainage hose.
Place everything in a
drainage point (or in a
sink) at a height of
between 70 and 100
cm. Ensure it is positio-
ned securely. Air must
be able to enter the end of the hose, to avoid any
risk of siphoning.
*depending on model
2
4
47