Weather Forecast Symbols; Additional Transmitters - TFA 35.1116 Mode D'emploi

TFA_No_35.1116_Anl_ 31.01.2012
CULT – Wireless Weather Station
• The temperature indication flashes.
• Press ▲ or ▼ button to adjust the upper temperature limit.
• Confirm with alarm button.
• Press alarm button twice to get to the lower temperature limit.
• and OFF or the last adjusted lower temperature limit is indicated.
• Press alarm button for 3 seconds to enter the setting mode.
• The temperature indication flashes.
• Press ▲ or ▼ button to adjust the lower temperature limit.
• Confirm with alarm button.
• Once the temperature alarm starts to ring,
turn off the alarm function, press alarm button.
• The alarm setting is always valid for all connected transmitters (CH 1,
2 and 3).
• Press ▼ button to deactivate the alarm function in the corresponding
alarm mode.

7.11 Weather forecast symbols

• There are 7 different weather symbols:
sunny partly cloudy
cloudy
• The weather forecast relates to a range of 12 to 24 hours and indi-
cates only a general weather trend. For example, if the current
weather is cloudy and the rain icon is displayed, it does not mean the
product is faulty because it is not raining. It simply means that the air
pressure has dropped and the weather is expected to get worse but
not necessarily rainy. The accuracy is about 70 %.
• The sun symbol also appears at night if there is a starry night.
7.12 Weather trend pointer
• The trend pointer displayed on the LCD indicates if the atmospheric
pressure is increasing, steady or decreasing.
28
21:04 Uhr Seite 15
or is flashing. To
rainy heavy snowy heavy
rain snowfall
CULT – Wireless Weather Station
7.13 Outdoor transmitter
• After batteries are inserted in the transmitter, the outdoor tempera-
ture will automatically be transmitted to the basic unit on channel 1.
• After successful installation close the battery compartment of trans-
mitter carefully.
• Please reset the instrument and follow the battery installation proce-
dure if the instrument does not work properly. Change the batteries.

7.14 Additional transmitters

• For having more than one external transmitter (cat. no 30.3126),
select a different channel (2 or 3) for each transmitter by the chan-
nel switch inside the battery compartment of the transmitter.
• Insert the batteries in the transmitter, making sure the polarity is cor-
rect.
• Press and hold the ▼ button on the station for 3 sec. to start initializa-
tion manually.
• If you have installed more than one transmitter, press channel but-
ton to change between the outdoor transmitters.
• You can also choose an alternating channel display. Press and hold
channel button until the circle symbol appears
channel.
• To deactivate the function press the channel button and the symbol
disappears.
7.15 Positioning of basic unit and transmitter
• Choose a shady and dry position for the transmitter. (Direct sunshine
falsifies the measurement and continuous humidity strains the elec-
tronic components needlessly).
• Place the weather station in the living room using the table stand.
Avoid the vicinity of any interfering field like computer monitors or
TV sets and solid metal objects.
• Check the transmission of 433 MHz signal from the transmitter to the
display unit (transmission range 30 m free field). Within ferro-con-
crete rooms (basements, superstructures), the received signal is natu-
rally weakened.
• If necessary choose another position for transmitter and/or basic unit.
for alternating
29