Steba VG 50 Mode D'emploi page 25

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Cleaning and maintainance:
∙ The device should be cleaned after each use
∙ Unplug the device
∙ The device should cool down a little. It can be cleaned easier
when it is not that hot.
∙ Never immerse the device in water!
∙ Use a humid cloth with a little bit of detergent to clean it. Re-
sisting dirt should be covered with some oil, wait for ca 5 min
and try to remove it again with a humid cloth. Do not use abhe-
rasive cleaners. When cleaning the oil tray, be careful, that the
liquid in it is cooled down completely.
Working place:
Important:
Never place this device on or next to hot surfaces (e.g. hot stoves). Only use it on a
even, stable and a heat resisting surface. It is important that no inflamable items are
near to the device.
Safety requirements during usage:
∙ Only use the appliance at a safety plug socket. This should be connected to a earth
leakage circuit breaker
∙ Use the appliance only when it is assembled.
∙ While setting up the device, please note that the logo should always be in front of
you and the thermostat needs to be plugged in on the right.
∙ Do not use the grill plate outside of the appliance and never immerse into water.
∙ Never leave the appliance outdoors after usage.
∙ Fat and other grill food can spatter and drop. Therefore do not place the appliance
not directly on sensitive surfaces, e.g. Polished table tops, parquet or carpet.
∙ When using the appliance with stand, be sure that the stand is standing stable,
because the danger of burns when it falls
∙ Be sure that the cable is placed that way that it cannot be pulled or touched during
usage.
∙ Always unplug the appliance and cool it down before the device is carried away.
Never carry it when it is hot.
∙ Unplug the appliance after each usage or before cleaning.
∙ Always place the oil tray bellow the grill plate.
25

Publicité

Table des Matières
loading

Table des Matières