Troubleshooting - Bertazzoni REF31BMFIX Mode D'emploi De L'installateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Butter and cheese:
Should be wrapped in airtight foil or plastic
film wrap.
Milk bottles:
Should have a lid and be stored in the
door racks.
Hints for freezing
 When first starting-up or after a period
out of use, let the appliance run at least 2
hours on the higher settings before putting
food in the compartment.
Prepare food in small portions to enable
it to be rapidly and completely frozen and
to make it possible to subsequently thaw
only the quantity required.
 Wrap up the food in aluminum foil or
polyethylene food wraps which are airtight,
 Do not allow fresh , unfrozen food to
touch food which is already frozen to avoid
temperature rise of the latter.
Iced products,if consumed immediately
after
removal
from
compartment, could possibly cause frost
burns to the skin.

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not
functioning correctly, you can carry out some easy checks before calling for service,
please see below.
WARNING
1. Don't try to repair the appliance yourself. If the problem persists after you have made
the checks mentioned below, contact a qualified electrician, authorized service
engineer or the shop where you purchased the product.
2. A child entrapment warning statement is included in either the operating instructions
or in a use and care manual provided with each refrigerator.
Problem
Appliance is not working
correctly
21
It is recommended to label and date each
frozen package in order to keep track of
the storage time.
Hints for the storage of frozen food
Ensure that frozen food has been stored
correctly by the food retailer
 Once defrosted , food will deteriorate
rapidly and should not be re-frozen. Do not
exceed the storage period indicated by the
food manufacturer.
Switching off your appliance
If the appliance needs to be switched off
for an extended period, the following steps
should be taken prevent mold.
1. Remove all food.
2. Remove the power plug from the mains
socket.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged
the
freezer
open slightly to allow air to circulate.
Possible Cause & Solution
Check whether the power cord is plugged into the power outlet
properly.

Publicité

Chapitres

Table des Matières
loading

Table des Matières