Bertazzoni REF31BMFIX Mode D'emploi De L'installateur page 11

tubing to the shutoff valve using
the ferrule
compression nut. Do not over
tighten.
5- Place other end of tubing in sink or
empty container.
supply back on and open the
shutoff valve
contaminants out. Run water until
clear. Close Shutoff valve.
11
This section describes products with filters
sleeve and
Turn water
to flush any
only
Connecting the water supply to filter
inlet.
The items needed to complete the
connection can be found at your local
hardware store.
You can use plastic tubing, copper tubing,
or stainless steel tubing as the water line
installation kit.
PLASTIC COPPER
TUBING TUBING
1/4" plastic
tubing 1/4" copper
molded end tubing
(bulb)
1/4"
1/4"
compression
compression
nut (1)
nut (1)
Ferrule (2)
STAINLESS
STEEL
TUBING
1/4"
Stainless
tubing
1/4"
compression
nut (1)